Βλέπετε 33–48 από 97 αποτελέσματα
-

KPP-2 Knife Protection Pads
Protects your knife blades against scratches
KPP-2 Knife Protection Pads fit in the guide of the Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-1 Kitchen Knife Sharpener. The pads capture sharpening dust and steel particles that occur when sharpening. It protects the blade from scratches, so you can safely sharpen even your finest knives. If the pad in your guide is worn out, you can easily replace it yourself with a new set of KPP-2 Knife Protection Pads.
-

KS-123 Knife Angle Setter
Set the exact sharpening angle for any type of knife
With the KS-123 Knife Angle Setter you set the exact sharpening angle for virtually any knife. In three easy steps, this patented and sophisticated solution lets you set the precise angle even on knives with tapered blades. It is self-adjusting for the diameter of the grinding wheel, and fits all Tormek machines with a universal support. The calculations to get the right angle is based on exact geometric measurements, so this analog angle setter is always correct. Setting the sharpening angle on your knife has never been easier and more precise!
-

LA-120 Profiled Leather Honing Wheel
Hone the inside of arched edges
The LA-120 Profiled Leather Honing Wheel allows you to hone and polish the inside of tools with curved edges where access is otherwise difficult. Honing your woodturning gouges, carving gouges and V-gouges will be a walk in the park. The LA-120 Profiled Leather Honing Wheel fits all Tormek water-cooled sharpening systems and is mounted on your regular honing wheel.
-

LA-122 Set of Standard Exchange Discs
Replace worn-out profiled leather honing wheels
The LA-122 Set of Standard Exchange Discs allows you to easily replace worn or damaged leather in your profiled leather honing wheels. Replacement doesn’t take long, and your profiled leather honing wheels are as good as new again! The LA-122 Set of Standard Exchange Discs fits the LA-120 Profiled Leather Honing Wheel.
-

LA-124 Set of Narrow Exchange Discs
Hone the inside of small arched edges
You can replace the leather discs on your LA-120 Profiled Leather Honing Wheel with the LA-124 Set of Narrow Exchange Discs. This allows you to hone the inside of the edge on tools with a smaller radius or tighter angle.
-

LA-145 Leather Honing Wheel
Polish and deburr the edge
The LA-145 Leather Honing Wheel is always used with PA-70 Honing Compound. The leather honing wheel gently removes the burrs built up during sharpening and polishes your bevel for the sharpest and most edge retaining results. It’s also used for routine maintenance to quickly regain sharpness when you don’t need to establish a new bevel. The LA-145 Leather Honing Wheel fits the Tormek T-4.
-

LA-220 Leather Honing Wheel
Polish and deburr the edge
The LA-220 Leather Honing Wheel is always used with PA-70 Honing Compound. The leather honing wheel gently removes the burrs built up during sharpening and polishes your bevel for the sharpest and most edge retaining results. It’s also used for routine maintenance to quickly regain sharpness when you don’t need to establish a new bevel. The LA-220 Leather Honing Wheel fits the Tormek T-8.
-

MB-102 Multi Base
Get a flat bevel, or convert horizontal mounts to vertical
The MB-102 Multi Base allows you to sharpen on the side of Tormek’s diamond grinding wheels. This results in a completely flat bevel, which is preferable in certain applications. The MB-102 Multi Base is fully adjustable for optimal settings for each tool and jig. It also converts the horizontal mounts to vertical, for easier access when sharpening knives edge trailing, and for guided honing using knife jigs (so-called Frontal Vertical Base or FVB).
-

MH-380 Machine Cover
Protects your Tormek
The MH-380 Machine Cover protects your machine from shavings and wood dust and fits all Tormek models. The machine cover is made of 100% cotton. This is a breathable material so that no moisture is trapped.
-

MSK-200 Stainless Steel Shaft with EzyLock
Main shaft for T-4
Stainless steel main shaft and composite EzyLock. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to mount or remove the grinding wheel thanks to its unique design.
-

MSK-250 Stainless Steel Shaft with EzyLock
Exchange shaft for Tormek T-8 and older models
The main shaft, nut and EzyLock are all made of stainless steel. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to fit or remove the grinding wheel thanks to a unique design.
-

OWC-1 Tormek Converter
Tormek’s jig system on bench grinder with Wolverine Vee-arm
The OWC-1 Tormek Converter is an attachment that makes it possible to use the Tormek jig system directly on a bench grinder with a Wolverine Vee-Arm, together with the BGM-100 Bench Grinder Mounting Set.
-

PA-70 Honing Compound
Used with Tormek leather honing wheels
PA-70 Honing Compound is used together with Tormek leather honing wheels. The unique qualities of the leather in combination with the honing compound effectively remove the burr that occur during sharpening without damaging the edge. At the same time, the honing compound also polishes the bevel to its final finish.
-

PL-01 Profile Labels
Easy setting for sharpening woodturning tools
The PL-01 Profile Labels make it easy for you to repeat the sharpening angle and shape of your tool. You note the sharpening settings for your specific tool and attach the label to the ferrule of the tool. Then setting your jig will be a breeze the next time you’re ready to sharpen this tool!
-

PP-10 Profile Pen
Note the sharpening settings on your truing tools
The PP-10 Profile Pen is used to note down the sharpening settings for your woodturning tools on the PL-01 Profile Labels. The ink in the pen is alcohol-based and adheres permanently to the vinyl profile labels.
-

PW-160 Conical Composite Honing Wheel
Hones and polishes for durable razor-sharpness
The PW-160 Conical Composite Honing Wheel allows you to deburr and polish the bevel at the same time. It comes with integrated polish to reduce contamination, which is suitable for clean environments. This honing wheel is angled to allow you to hone even your longest knives. The PW-160 Conical Composite Honing Wheel is specially designed for the Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-1 Kitchen Knife Sharpener.