Exchange shaft for Tormek T-8 and older models
The main shaft, nut and EzyLock are all made of stainless steel. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to fit or remove the grinding wheel thanks to a unique design.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
As you can tell from the name, the MSK-200 Stainless Steel Shaft with EzyLock is made of stainless steel for maximum service life. With the Tormek EzyLock, which works as both a nut and a washer, it’s easy to mount the grinding wheel with nothing but your bare hands. The large pitch of the left-hand washer nut causes the rotational force of the grinding wheel to tighten the nut.
If you need to replace your grinding wheel, turn it clockwise while holding the honing wheel with your other hand. The EzyLock nut will then automatically release. This design makes it easy to work with different grinding wheels. When mounting the grinding wheel, turn the EzyLock nut counterclockwise by hand. When you start sharpening, the nut will automatically be tightened to the correct torque.
The newer drive wheels manufactured from 1993 onwards have a deep groove for the drive pin. You use the pre-drilled hole on these.
Older drive wheels manufactured before 1993 have a shallower groove for the drive pin. If you have one of these, you can either buy a new drive wheel (art. no. R23) or drill a hole 4 mm (0.16″) in diameter. More information can be found in the Instructions MSK-250 EN document.
They fit the Tormek T-8, Tormek T-7, Tormek 2000 and older models with a 250 mm (9 7/8″) diameter grinding wheel.
Shipping weight 0.48 kg (1.06 lb)
Silver
Stainless steel
2-year warranty
Instructions MSK-250 EN pdf, 1.2 MB.
To see all patents, please visit tormek.com/patents
See how easy it is to change grinding wheels with EzyLock, included in the MSK-250 Stainless Steel Shaft with EzyLock.
Watch this special episode of the Tormek Live Sharpening Classes and see which machine models you can upgrade with the MSK-250 Stainless Steel Shaft with EzyLock.
The MSK-250 Stainless Steel Shaft with EzyLock comes fully assembled and ready to install.
Μπορεί επίσης να σας ενδιαφέρει
Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 is a spare part that breathes new life into your Tormek. This drive wheel is the same as the one fitted in the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-4 sharpening machines, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
The base for all jigs on Tormek T-8
The universal support forms the base for the Tormek water-cooled sharpening system. The US-105 Universal Support with Micro Adjust T-8 has a trapezoidal thread with flat thread tips that won’t be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.
Water trough for Tormek T-7 and older models
The AWT-250 Advanced Water Trough for T-7 has a greatly extended frame to keep your workbench free of water. It also comes with a built-in magnet that effectively traps steel particles while you sharpen and allows you to clean them off when you’re done. A removable drip cover for long tools is also included.
New water trough for Tormek T-8
Need to replace the water trough on your Tormek T-8? No problem! R-3090 Water Trough for T-8 is the spare part you need. Just attach the trough, fill it with water and start sharpening your tools again! The water trough fits the Tormek T-8 Original and Tormek T-8 Custom.
