Για ελεγχόμενο και επαναλαμβανόμενο ακόνισμα ακριβείας.
Enables older machine models to use the universal support
The USS-2 Mounting Kit for Universal Support upgrades older Tormek machines by allowing the use of the universal support. It enables the use of tormek’s newest jigs and allows sharpening in the vertical position. Designed to upgrade older machines without the universal support, it modernizes the machine, bringing it closer to the functionality of the latest Tormek machines.
Replace the diamond tip in your truing tool
The ADV-D Diamond Exchange Tip for TT-50 allows you to replace the diamond tip in the TT-50 Truing Tool when it’s worn out. This will make your truing tool as effective as when it was new!
Horizontal precision mounts for older machine models.
The XB-100 Horizontal Base allows you to sharpen with the rotation of the grinding wheel running away from the edge (edge trailing) instead of into the edge (edge leading). The XB-100 Horizontal Base was supplied as standard on all Tormek S-2000 and S-1200 machines after 8 August 2001. If you have an older machine, you can upgrade it with a horizontal base.
Replace worn-out profiled leather honing wheels
The LA-122 Set of Standard Exchange Discs allows you to easily replace worn or damaged leather in your profiled leather honing wheels. Replacement doesn’t take long, and your profiled leather honing wheels are as good as new again! The LA-122 Set of Standard Exchange Discs fits the LA-120 Profiled Leather Honing Wheel.
Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 is a spare part that breathes new life into your Tormek. This drive wheel is the same as the one fitted in the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-4 sharpening machines, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-23 Drive Wheel with Rubber Ring for T-8 is a spare part that breathes new life into your Tormek. This drive wheel fits the Tormek T-8 Original and Tormek T-8 Custom sharpening machines, as well as older machine models with a grinding wheel 250 mm (9 7/8″) in diameter.
The base for all jigs on Tormek T-4
The universal support forms the base for the Tormek wet grinding system. The US-103 Universal Support with Micro Adjust T-4 has a trapezoidal thread with flat thread tips that won’t be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.
The base for all jigs on Tormek T-8
The universal support forms the base for the Tormek water-cooled sharpening system. The US-105 Universal Support with Micro Adjust T-8 has a trapezoidal thread with flat thread tips that won’t be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.
Water trough for Tormek T-4 and older models
Water Trough for the Tormek T-4, Tormek T-3 and Tormek 1200. You can easily replace your old water trough with the WT-200 Water Trough for T-4 if it’s worn out.
Water trough for Tormek T-7 and older models
The AWT-250 Advanced Water Trough for T-7 has a greatly extended frame to keep your workbench free of water. It also comes with a built-in magnet that effectively traps steel particles while you sharpen and allows you to clean them off when you’re done. A removable drip cover for long tools is also included.
New water trough for Tormek T-8
Need to replace the water trough on your Tormek T-8? No problem! R-3090 Water Trough for T-8 is the spare part you need. Just attach the trough, fill it with water and start sharpening your tools again! The water trough fits the Tormek T-8 Original and Tormek T-8 Custom.
Main shaft for T-4
Stainless steel main shaft and composite EzyLock. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to mount or remove the grinding wheel thanks to its unique design.
Exchange shaft for Tormek T-8 and older models
The main shaft, nut and EzyLock are all made of stainless steel. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to fit or remove the grinding wheel thanks to a unique design.
Protects you and your knives
Tormek’s knife sheaths protect your knives during transport or when stored in a drawer. Your fingers are also protected from cuts when you use knife sheaths. The EP-63 Five-Pack Wide Knife Sheaths are made of sturdy cardboard with Tormek print.
Protects you and your knives
Tormek’s knife sheaths protect your knives during transport or when stored in a drawer. Your fingers are also protected from cuts when you use knife sheaths. EP-36 Five-Pack Narrow Knife Sheaths are made of sturdy cardboard with Tormek print.
Easy setting for sharpening woodturning tools
The PL-01 Profile Labels make it easy for you to repeat the sharpening angle and shape of your tool. You note the sharpening settings for your specific tool and attach the label to the ferrule of the tool. Then setting your jig will be a breeze the next time you’re ready to sharpen this tool!
