New water trough for Tormek T-8
Need to replace the water trough on your Tormek T-8? No problem! R-3090 Water Trough for T-8 is the spare part you need. Just attach the trough, fill it with water and start sharpening your tools again! The water trough fits the Tormek T-8 Original and Tormek T-8 Custom.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
The scraper for the R-3090 Water Trough for T-8 has a built-in magnet that effectively traps steel particles while you sharpen, keeping your grinding wheel cleaner and preventing clogging. These particles can otherwise be pressed into the surface layer of the grinding wheel and impair its abrasive properties. The steel particles are all collected at the magnet when you empty the water trough. You can easily scrape off the steel particles using the scraper that attaches magnetically to the outside of the water trough. The magnetic scraper is not included in the R-3090 Water Trough for T-8, so make sure to keep the scraper from your previous water trough.
One of the foundations of the Tormek sharpening system is water cooling, which both keeps temperatures down so as not to damage tempering, and removes sharpening dust and steel particles from the sharpening process. It’s unusual, but the water trough on the Tormek T-8 can be damaged. In that case, you can easily order a new one that’s ready to be mounted and filled with water so that you can start sharpening with water cooling again!
The R-3090 Water Trough for T-8 comes as standard with the Tormek T-8 Original and Tormek T-8 Custom, and only fits these machines.
Shipping weight 0,41 kg
Black
Black ABS plastic, steel
2-year warranty
To see all patents, please visit tormek.com/patents
Watch this special episode of the Tormek Live Sharpening Classes to find out what upgrades you can make to your older Tormek machine.
The R-3090 Water Trough for T-8 comes fully assembled and ready to use.
Μπορεί επίσης να σας ενδιαφέρει
Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 is a spare part that breathes new life into your Tormek. This drive wheel is the same as the one fitted in the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-4 sharpening machines, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
Water trough for Tormek T-4 and older models
Water Trough for the Tormek T-4, Tormek T-3 and Tormek 1200. You can easily replace your old water trough with the WT-200 Water Trough for T-4 if it’s worn out.
Main shaft for T-4
Stainless steel main shaft and composite EzyLock. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to mount or remove the grinding wheel thanks to its unique design.
Exchange shaft for Tormek T-8 and older models
The main shaft, nut and EzyLock are all made of stainless steel. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to fit or remove the grinding wheel thanks to a unique design.
