Color the bevel and find the angle
The EM-15 Edge Marker is a quality permanent marker with a cut tip. This makes it easy to color the bevel when you want to find its existing angle and repeat it.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
The EM-15 Edge Marker is used in the Tormek method for repeating the existing bevel angle of a tool. This means you remove a minimal amount of steel each time you sharpen your tool. Watch the video further down on this page to get a step-by-step instruction.
This marker is alcohol-based and has a tip 1–4.6 mm (0.04–0.18″) in size.
This is how you use the marker to set your sharpening to replicate the existing bevel angle:
Shipping weight 0.02 kg (0.04 lb)
Black
Plastic
To see all patents, please visit tormek.com/patents
1. Color the bevel, and insert the knife in the guide2. Turn the grinding wheel by hand and check where the coloring is worn off3. Adjust the angle setting on the guide until the coloring is removed from the entire width of the bevelAll set, start sharpening!
This video shows you step by step how to replicate the existing bevel angle of your tool, using the Tormek marker method. It’s quick, easy and efficient!
1. Color the bevel, and insert the knife in the guide
2. Turn the grinding wheel by hand and check where the coloring is worn off
3. Adjust the angle setting on the guide until the coloring is removed from the entire width of the bevel
All set, start sharpening!
This video shows you step by step how to replicate the existing bevel angle of your tool, using the Tormek marker method. It’s quick, easy and efficient!
Μπορεί επίσης να σας ενδιαφέρει
Protects you and your knives
Tormek’s knife sheaths protect your knives during transport or when stored in a drawer. Your fingers are also protected from cuts when you use knife sheaths. EP-36 Five-Pack Narrow Knife Sheaths are made of sturdy cardboard with Tormek print.
Protects you and your knives
Tormek’s knife sheaths protect your knives during transport or when stored in a drawer. Your fingers are also protected from cuts when you use knife sheaths. The EP-63 Five-Pack Wide Knife Sheaths are made of sturdy cardboard with Tormek print.
Protects diamond grinding wheels against rust
ACC-150 Anti-Corrosion Concentrate makes the water corrosion inhibitant and protects your diamond grinding wheels to prevents them from rusting. The anti-corrosion concentrate is always used for wet sharpening with diamond grinding wheels. Anti-corrosion concentrate won’t harm your regular grindstones if you have it in the water, so you can keep treated water if you want to switch between a diamond grinding wheel and a grindstone, and then back again.
Used with Tormek leather honing wheels
PA-70 Honing Compound is used together with Tormek leather honing wheels. The unique qualities of the leather in combination with the honing compound effectively remove the burr that occur during sharpening without damaging the edge. At the same time, the honing compound also polishes the bevel to its final finish.
