Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-23 Drive Wheel with Rubber Ring for T-8 is a spare part that breathes new life into your Tormek. This drive wheel fits the Tormek T-8 Original and Tormek T-8 Custom sharpening machines, as well as older machine models with a grinding wheel 250 mm (9 7/8″) in diameter.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
After many years of use, the drive wheel in your Tormek may need to be replaced. If your drive wheel is worn out, the rubber has dried or the wheel is damaged, you can easily replace it with the R-23 Drive Wheel with Rubber Ring for T-8. This breathes new life into your Tormek sharpening machine, and you can keep your tools sharp – hopefully for many years to come.
Fits the Tormek T-8 Original and Tormek T-8 Custom sharpening machines, as well as older machine models with a grinding wheel 250 mm (9 7/8″) in diameter.
Shipping weight 0.62 kg
Diameter: 165 mm (6 ½”)
Width: 20 mm (3/4″)
Black/silver
Zinc, RKX18 rubber
2-year warranty
To see all patents, please visit tormek.com/patents
Watch this special episode of the Tormek Live Sharpening Classes to find out what upgrades you can make to your older Tormek machine.
The R-23 Drive Wheel with Rubber Ring for T-8 comes fully assembled and ready to install.
Μπορεί επίσης να σας ενδιαφέρει
Replace worn-out profiled leather honing wheels
The LA-122 Set of Standard Exchange Discs allows you to easily replace worn or damaged leather in your profiled leather honing wheels. Replacement doesn’t take long, and your profiled leather honing wheels are as good as new again! The LA-122 Set of Standard Exchange Discs fits the LA-120 Profiled Leather Honing Wheel.
The base for all jigs on Tormek T-8
The universal support forms the base for the Tormek water-cooled sharpening system. The US-105 Universal Support with Micro Adjust T-8 has a trapezoidal thread with flat thread tips that won’t be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.
New water trough for Tormek T-8
Need to replace the water trough on your Tormek T-8? No problem! R-3090 Water Trough for T-8 is the spare part you need. Just attach the trough, fill it with water and start sharpening your tools again! The water trough fits the Tormek T-8 Original and Tormek T-8 Custom.
Main shaft for T-4
Stainless steel main shaft and composite EzyLock. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to mount or remove the grinding wheel thanks to its unique design.
