Set the correct sharpening angle easily and precisely
The Tormek WM-200 AngleMaster has several smart features. You can use it to set the jig before sharpening, or to measure an existing bevel angle of a tool. It can also be adjusted to the diameter of the grinding wheel, and you can easily set the sharpening angle for sharpening on the side of a diamond grinding wheel as well.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
The sharpening angle can be set from 10° to 75° with the WM-200 AngleMaster. The AngleMaster is designed to work on all grinding wheels with a diameter from 150 mm (5 7/8″) to 250 mm (9 7/8″). So you get an accurate setting even if you have a grindstone that’s been worn down a lot.
The WM-200 AngleMaster has two magnets so you can easily place it on the machine so that it’s always close to hand. This applies to all Tormek models except for the 1200 and T-3. On the Tormek T-4, you can place the AngleMaster on the machine plate, which is made of metal; and on the Tormek T-8 you can place it on the plate mount included.
Shipping weight 0.10 kg (0.22 lb)
Gray/black
Plastic
2-year warranty
Instructions WM-200 EN pdf, 506.1 kB.
Parts breakdown WM-200 EN pdf, 82.1 kB.
To see all patents, please visit tormek.com/patents
This short video shows you how the WM-200 AngleMaster works and how you can use it for both chisels and knives.
The WM-200 AngleMaster comes fully assembled and ready to use.
Μπορεί επίσης να σας ενδιαφέρει
For smart water management
The TF-2 Tilt Feet incline your Tormek T-8 for improved water management. They also secure the main shaft during transportation while allowing you to use the machine without the grindstone. Comes with Tormek T-8 manufactured April 2025 or later and can be purchased at your local Tormek retailer. And the best part? You can get them for free by printing your own at home with a 3D printer.
Reduces vibration and collects water
The RM-533 Rubber Work Mat gives you a waterproof, non-slip work surface. This rubber work mat is made of thick natural rubber. It has a raised edge that keeps liquids on the mat. The RM-533 Rubber Work Mat protects you from vibrations, your work area from liquids and your newly sharpened tools from hard knocks.
Simple setting for sharp turning tools
The TTS-100 Turning Tool Setter is the key to efficient sharpening of various woodturning tools. You can repeat the exact shape and angle of the edge in seconds on bowl gouges and profile gouges, as well as on flat and oval woodturning chisels with either a straight or a rounded edge. Used for setting the SVD-186 R Gouge Jig and the SVS-50 Multi Jig.
Everything about the Tormek method
The HB-10 Tormek Handbook is included with every water-cooled sharpening system. It provides basic information on sharpening and different techniques, as well as user instructions and valuable tips for each jig and how to sharpen specific tools. Most of what there is to know about the Tormek method can be found here.
