For rapid material removal
Diamond grinding wheel for Tormek T-8. The DC-250 Diamond Wheel Coarse is designed to provide efficient sharpening and rapid repair of a dull or damaged edge. It has a grit of 360 for fast steel removal and is particularly useful for tool shaping.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
This diamond grinding wheel can grind all types of materials, including steel, ceramics and carbide. The DC-250 Diamond Wheel Coarse fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel 250 mm (9 7/8″) in diameter.
The DC-250 Diamond Wheel Coarse doesn’t give a fine surface finish and should be followed up by sharpening with a finer grinding wheel, such as the DF-250 Diamond Wheel Fine or DE-250 Diamond Wheel Extra Fine.
All of Tormek’s diamond grinding wheels have exceptional durability and constant abrasive power, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both jig setting and sharpening.
The constant shape makes it possible to sharpen either on the side of the wheel or on its upper surface. Side sharpening is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slightly concave surface.
For sharpening on the side of the diamond grinding wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.
All diamond grinding wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml (0.02 pints) of concentrate to 250 ml (0.4 pints) of water (~4%). We recommend always using water when sharpening with diamond grinding wheels if possible, as it both prolongs the service life of the wheel and provides a smoother sharpening surface. You can also sharpen without water.
Note: Apply only a very low pressure when sharpening on diamond grinding wheels. Instead, let the diamonds do the work. Important! Too high pressure when sharpening can damage the wheel beyond repair. Learn all about sharpening with diamond grinding wheels!
Design protected Ⓓ.
Diameter: 250 mm (9 13/16″)
Width: 50 mm (1 15/16″)
Shipping weight 4.22 kg (9.3 lb)
Silver
Steel, diamond coating
360
2-year warranty
Important About Diamond Grinding Wheels pdf, 576.2 kB.
Mounting Instructions Grinding Wheels pdf, 2 MB.
Material safety data sheet ACC-150 EN pdf, 188.2 kB.
To see all patents, please visit tormek.com/patents
Get a brief introduction to Tormek’s diamond grinding wheels.
Sébastien interviews our CEO Håkan about why we choose to use diamond as an abrasive.
The DC-250 Diamond Wheel Coarse comes fully assembled and ready to use.
Μπορεί επίσης να σας ενδιαφέρει
Constant shape and mirror finish
Diamond grinding wheel for Tormek T-4. The DE-200 Diamond Wheel Extra Fine is the diamond wheel that provides an extra smooth finish and is especially suited for sharpening carving tools and knives with minimal steel removal needs. The grit size is 1,200.
Constant shape and smooth surface finish
Diamond grinding wheel for the Tormek T-8. The Tormek DE-250 Diamond Wheel Extra Fine is a diamond grinding wheel that provides an extra smooth finish and is especially suited to carving tools and knives requiring minimal steel removal. It is 1,200 grit.
For effective material removal and smooth surface finish
Diamond grinding wheel for the Tormek T-8. Tormek’s DF-250 Diamond Wheel Fine is the ultimate all-round diamond grinding wheel, combining efficient steel removal with a smoothly sharpened surface. The grinding wheel has a grit of 600, providing fast sharpening and a smooth surface finish.
The compact classic
The Tormek SG-200 Original Grindstone fits the Tormek T-4 and all earlier machine models with a grinding wheel 200 mm (7 7/8″) in diameter. Also known as Tormek SuperGrind®, it’s been developed over the years to combine efficient sharpening and a fine surface finish with a long service life. The more compact dimensions are adapted to our more compact machines for anyone with limited space or those who need to easily transport their Tormek. The SG-200 Original Grindstone is supplied as standard with the Tormek T-4 Original and Tormek T-4 Bushcraft.
