Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 is a spare part that breathes new life into your Tormek. This drive wheel is the same as the one fitted in the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-4 sharpening machines, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
After many years of use, the drive wheel in your Tormek may need to be replaced. If your drive wheel is worn out, the rubber has dried or the wheel is damaged, you can easily replace it with the R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1. This breathes new life into your Tormek sharpening machine, and you can keep your tools sharp – hopefully for many years to come.
Fits the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen, Tormek T-4 Original and Tormek T-4 Bushcraft, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
Shipping weight 0.15 kg
Diameter: 115 mm (4 1/2″)
Width: 18 mm (3/4″)
Black
ABS plastic, RKX18 rubber
2-year warranty
To see all patents, please visit tormek.com/patents
Watch this special episode of the Tormek Live Sharpening Classes to find out what upgrades you can make to your older Tormek machine.
The R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 comes fully assembled and ready to fit.
Μπορεί επίσης να σας ενδιαφέρει
Replace the diamond tip in your truing tool
The ADV-D Diamond Exchange Tip for TT-50 allows you to replace the diamond tip in the TT-50 Truing Tool when it’s worn out. This will make your truing tool as effective as when it was new!
Horizontal precision mounts for older machine models.
The XB-100 Horizontal Base allows you to sharpen with the rotation of the grinding wheel running away from the edge (edge trailing) instead of into the edge (edge leading). The XB-100 Horizontal Base was supplied as standard on all Tormek S-2000 and S-1200 machines after 8 August 2001. If you have an older machine, you can upgrade it with a horizontal base.
The base for all jigs on Tormek T-8
The universal support forms the base for the Tormek water-cooled sharpening system. The US-105 Universal Support with Micro Adjust T-8 has a trapezoidal thread with flat thread tips that won’t be damaged by the locking knob. The universal support is also equipped with Micro Adjust for quick and precise setting of the sharpening angle and sharpening depth.
Water trough for Tormek T-7 and older models
The AWT-250 Advanced Water Trough for T-7 has a greatly extended frame to keep your workbench free of water. It also comes with a built-in magnet that effectively traps steel particles while you sharpen and allows you to clean them off when you’re done. A removable drip cover for long tools is also included.
