Main shaft for T-4
Stainless steel main shaft and composite EzyLock. EzyLock ensures that the grinding wheel is securely fastened, with no risk of loosening. No tools are needed to mount or remove the grinding wheel thanks to its unique design.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
As you can tell from the name, the MSK-200 Stainless Steel Shaft with EzyLock is made of stainless steel for maximum service life. You can easily mount the grinding wheel with your bare hands with the composite Tormek EzyLock, which works as both a nut and a washer. The large pitch of the left-hand nut in the composite knob causes the rotational force of the grinding wheel to tighten the nut.
If you need to replace your grinding wheel, turn it clockwise while holding the honing wheel with your other hand. The EzyLock nut will then automatically release. This design makes it easy to work with different grinding wheels. When mounting the grinding wheel, turn the EzyLock nut counterclockwise by hand. When you start sharpening, the nut will automatically be tightened to the correct torque.
Fits the Tormek T-4, Tormek T-3 and older models with a 200 mm (7 7/8″) grinding wheel.
Shipping weight 0.41 kg (0.9 lb)
Silver
Stainless steel, composite EzyLock
2-year warranty
Instructions MSK-200 EN pdf, 1 MB.
To see all patents, please visit tormek.com/patents
See how easy it is to change grinding wheels with EzyLock, included in the MSK-200 Stainless Steel Shaft with EzyLock.
Watch this special episode of the Tormek Live Sharpening Classes and see which machine models you can upgrade with the MSK-200 Stainless Steel Shaft with EzyLock.
The MSK-200 Stainless Steel Shaft with EzyLock comes fully assembled and ready to install.
Μπορεί επίσης να σας ενδιαφέρει
Replace worn-out profiled leather honing wheels
The LA-122 Set of Standard Exchange Discs allows you to easily replace worn or damaged leather in your profiled leather honing wheels. Replacement doesn’t take long, and your profiled leather honing wheels are as good as new again! The LA-122 Set of Standard Exchange Discs fits the LA-120 Profiled Leather Honing Wheel.
Replace the drive wheel and give your machine a new lease of life
Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring T-4 T-2 T-1 is a spare part that breathes new life into your Tormek. This drive wheel is the same as the one fitted in the Tormek T-1 Kitchen Knife Sharpener, Tormek T-2 Pro Kitchen Knife Sharpener and Tormek T-4 sharpening machines, as well as older machine models with a grinding wheel 200 mm (7 7/8″) in diameter.
Water trough for Tormek T-4 and older models
Water Trough for the Tormek T-4, Tormek T-3 and Tormek 1200. You can easily replace your old water trough with the WT-200 Water Trough for T-4 if it’s worn out.
Water trough for Tormek T-7 and older models
The AWT-250 Advanced Water Trough for T-7 has a greatly extended frame to keep your workbench free of water. It also comes with a built-in magnet that effectively traps steel particles while you sharpen and allows you to clean them off when you’re done. A removable drip cover for long tools is also included.
