Used with Tormek leather honing wheels
PA-70 Honing Compound is used together with Tormek leather honing wheels. The unique qualities of the leather in combination with the honing compound effectively remove the burr that occur during sharpening without damaging the edge. At the same time, the honing compound also polishes the bevel to its final finish.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
PA-70 Honing Compound consists of a combination of microabrasives and polishing components, and has an average grit of 3 microns. For best results, always use honing compound when honing on a leather honing wheel. One application is enough for 5 to 10 tools. The leather becomes softer and more effective every time you use the honing compound. And your tools will be sharper than ever.
Apply a thin string of PA-70 Honing Compound to the leather honing wheel before starting the machine. Turn the honing wheel by hand. Start the machine and distribute the honing compound by lightly pressing the tool against the wheel. Allow the paste to penetrate the leather.
When you have a new leather honing wheel, saturate it with the light machine oil included first to give it the right texture and make it capable of absorbing the honing compound. If you work in a dry climate, after a while you might need to impregnate the honing wheel again with a few drops of oil before using the honing compound. Don’t let the honing compound dry out on the leather honing wheel, apply more oil if needed.
Shipping weight 0.09 kg (0.2 lb)
Yellow
Aluminum oxide, Petroleum distillate, Ammonia
Aluminum tube
Material safety data sheet PA-70 EN pdf, 224.8 kB.
To see all patents, please visit tormek.com/patents
Watch this episode of Tormek’s sharpening classes where Wolfgang and Sébastien teach you the basics of honing.
PA-70 Honing Compound comes fully assembled and ready to use. One tube contains 70 g (0.15 lb) of honing compound.
Μπορεί επίσης να σας ενδιαφέρει
Protects you and your knives
Tormek’s knife sheaths protect your knives during transport or when stored in a drawer. Your fingers are also protected from cuts when you use knife sheaths. The EP-63 Five-Pack Wide Knife Sheaths are made of sturdy cardboard with Tormek print.
Note the sharpening settings on your truing tools
The PP-10 Profile Pen is used to note down the sharpening settings for your woodturning tools on the PL-01 Profile Labels. The ink in the pen is alcohol-based and adheres permanently to the vinyl profile labels.
Easy setting for sharpening woodturning tools
The PL-01 Profile Labels make it easy for you to repeat the sharpening angle and shape of your tool. You note the sharpening settings for your specific tool and attach the label to the ferrule of the tool. Then setting your jig will be a breeze the next time you’re ready to sharpen this tool!
Color the bevel and find the angle
The EM-15 Edge Marker is a quality permanent marker with a cut tip. This makes it easy to color the bevel when you want to find its existing angle and repeat it.
