Change the grit size on your grindstone
The SP-650 Stone Grader allows you to adjust the sharpening characteristics of your Original Grindstone or Blackstone Silicon. These grindstones have adjustable sharpening characteristics equivalent to between 220 and 1000 grit. The fine side of the stone grader provides finer sharpening characteristics, while the coarse side is used to maintain the grindstone and reactivate the grit for more effective and coarser sharpening.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
The SP-650 Stone Grader allows you to adjust the characteristics of the grindstone so that they’re equivalent to between 220 and 1000 grit. If you want to adjust the stone for finer sharpening, press the fine side of the SP-650 Stone Grader against the surface of the grindstone with the machine running. This will change the surface of the grindstone to give finer sharpening.
When you want to restore the grindstone to give more effective material removal and coarser sharpening, press the coarse side of the stone grader against the grindstone with the machine running for a few seconds until you see or feel the surface of the grindstone change. You can also hear the sound change as your grading takes effect.
Tormek’s SG-250 Original Grindstone, SG-200 Original Grindstone and SB-250 Blackstone Silicon are designed so that their characteristics can be adjusted from coarse to fine sharpening using the SP-650 Stone Grader.
This has a major advantage in that you can remove a lot of steel more quickly with a coarse grindstone, while also being able to do the final sharpening with the same grindstone. Besides the convenience of not having to swap equipment, you’re also guaranteed the same sharpening angle because no other adjustments are made, except the grit.
Use the coarse side of the stone grader as needed to keep your original grindstone or SB-250 Blackstone Silicon clean and effective. Press it firmly against the stone with your hands for about 30 seconds. This process creates no unnecessary wear on the stone and can be repeated an unlimited number of times.
You can also clean your SJ-250 Japanese Waterstone or SJ-200 Japanese Waterstone in the same way, but with the fine side of the SP-650 Stone Grader. Never use the coarse side of the stone grader on your Japanese Waterstone as this may damage the grindstone.
Shipping weight 0.45 kg (0.99 lb)
Gray
Ceramic bonded silicon carbide
2-year warranty
Instructions SP-650 pdf, 683.4 kB, opens in new window.
To see all patents, please visit tormek.com/patents
The stone grader is used to change the characteristics of the grindstone. The fine side gives the surface of the stone up to about 1000 grit. The coarse side restores the stone to 220 grit. The stone grader can also be used to reactivate a clogged stone.
The SP-650 Stone Grader comes fully assembled and ready to use.
Μπορεί επίσης να σας ενδιαφέρει
Use Tormek jigs for your bench grinder
The BGM-100 Bench Grinder Mounting Set allows you to use Tormek’s woodturning tool jigs on your bench grinder. This is an advantage if you need to remove a lot of steel on a new tool to create your desired shape. However, be careful not to overheat the steel, as the tool may lose its temper.
For smart water management
The TF-2 Tilt Feet incline your Tormek T-8 for improved water management. They also secure the main shaft during transportation while allowing you to use the machine without the grindstone. Comes with Tormek T-8 manufactured April 2025 or later and can be purchased at your local Tormek retailer. And the best part? You can get them for free by printing your own at home with a 3D printer.
Reduces vibration and collects water
The RM-533 Rubber Work Mat gives you a waterproof, non-slip work surface. This rubber work mat is made of thick natural rubber. It has a raised edge that keeps liquids on the mat. The RM-533 Rubber Work Mat protects you from vibrations, your work area from liquids and your newly sharpened tools from hard knocks.
Simple setting for sharp turning tools
The TTS-100 Turning Tool Setter is the key to efficient sharpening of various woodturning tools. You can repeat the exact shape and angle of the edge in seconds on bowl gouges and profile gouges, as well as on flat and oval woodturning chisels with either a straight or a rounded edge. Used for setting the SVD-186 R Gouge Jig and the SVS-50 Multi Jig.
