Constant shape and smooth surface finish
Diamond grinding wheel for the Tormek T-8. The Tormek DE-250 Diamond Wheel Extra Fine is a diamond grinding wheel that provides an extra smooth finish and is especially suited to carving tools and knives requiring minimal steel removal. It is 1,200 grit.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
With this diamond grinding wheel, you can sharpen all types of materials, including steel, ceramics and carbide. The DE-250 Diamond Wheel Extra Fine fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel of 250 mm (9 7/8″) diameter.
The DE-250 Diamond Wheel Extra Fine is especially appreciated by woodcarvers and others who need a mirror finish on the bevel. If you need to give your tool a new edge or shape, it’s best to do that on another grinding wheel first and then use your DE-250 Diamond Wheel Extra Fine to give the final finish.
All of Tormek’s diamond grinding wheels have exceptional durability and constant abrasive power, which means that they always stay round and flat with a full-size diameter. Users who often sharpen the same tool benefit greatly from this, as it simplifies both jig setting and sharpening.
The constant shape makes it possible to sharpen either on the side of the wheel or on its upper surface. Side sharpening is perfect for smaller tools such as knives, chisels, carving gouges and v-tools. The result is an edge with a completely flat bevel, instead of a slightly concave surface.
For sharpening on the side of the diamond grinding wheels, we recommend using the MB-102 Multi Base together with the jig designed for your specific tool. Both the base and the jigs give you support and control throughout the sharpening process.
All diamond grinding wheels are supplied with 150 ml of ACC-150 Anti-Corrosion Concentrate. Always add the concentrate to the water when sharpening with water to prevent rust on the grinding wheel. Add 10 ml (0.02 pints) of concentrate to 250 ml (0.4 pints) of water (~4%). We recommend always using water when sharpening with diamond grinding wheels if possible, as it both prolongs the service life of the wheel and provides a smoother sharpening surface. You can also sharpen without water.
Note: Apply only a very low pressure when sharpening on diamond grinding wheels. Instead, let the diamonds do the work. Important! Too high pressure when sharpening can damage the wheel beyond repair. Learn all about sharpening with diamond grinding wheels!
Design protected Ⓓ.
Diameter: 250 mm (9 13/16″)
Width: 50 mm (1 15/16″)
Shipping weight 4.22 kg (9.3 lb)
Silver
Steel, diamond coating
1,200
2-year warranty
Important About Diamond Grinding Wheels pdf, 576.2 kB.
Instructions Mounting Grinding Wheels pdf, 2 MB.
Material safety data sheet ACC-150 EN pdf, 188.2 kB.
To see all patents, please visit tormek.com/patents
Get a brief introduction to Tormek’s diamond grinding wheels.
Sébastien interviews our CEO Håkan about why we choose to use diamond as an abrasive.
The DE-250 Diamond Wheel Extra Fine comes fully assembled and ready to use.
Μπορεί επίσης να σας ενδιαφέρει
Constant shape and mirror finish
Diamond grinding wheel for Tormek T-4. The DE-200 Diamond Wheel Extra Fine is the diamond wheel that provides an extra smooth finish and is especially suited for sharpening carving tools and knives with minimal steel removal needs. The grit size is 1,200.
Constant shape, efficient material removal and a nice finish
Diamond grinding wheel for Tormek T-4. Tormek’s DF-200 Diamond Wheel Fine is the ultimate all-round diamond grinding wheel, combining efficient steel removal with a smooth grinding surface. The wheel has a grit size of 600, providing effective sharpening and a smooth surface finish.
The great classic
The Tormek SG-250 Original Grindstone fits the Tormek T-8 and all earlier machine models with a grinding wheel 250 mm (9.84″) in diameter. Also known as Tormek SuperGrind®, it’s been developed to combine efficient sharpening and a fine surface finish with long lifespan. The SG-250 Original Grindstone is supplied as standard with the Tormek T-8 Original.
The compact classic
The Tormek SG-200 Original Grindstone fits the Tormek T-4 and all earlier machine models with a grinding wheel 200 mm (7 7/8″) in diameter. Also known as Tormek SuperGrind®, it’s been developed over the years to combine efficient sharpening and a fine surface finish with a long service life. The more compact dimensions are adapted to our more compact machines for anyone with limited space or those who need to easily transport their Tormek. The SG-200 Original Grindstone is supplied as standard with the Tormek T-4 Original and Tormek T-4 Bushcraft.
