Sharpen your axes and knives for hunting and outdoor activities
With your Tormek T-4 Bushcraft, you can sharpen your knives and axes to make them sharper than when they were new and get them ready for hunting, outdoor activities and adventures. This sharpening machine is versatile, and it’s easy to learn how to use it. You decide the angle based on what you want to use your tool for. The compact design makes it easy to take with you, no matter where you’re going – to a hunting lodge, a cabin, or a mountain lodge.
Μου αρέσει να μαγειρεύω, να ψήνω και να κόβω. Έχω χρησιμοποιήσει πολλά ακονιστήρια αλλά αποφάσισα να κάνω ένα δώρο στον εαυτό μου που θα μου κρατήσει για μια ζωή. Αυτό το ακονιστήρι είναι πανεύκολο στη χρήση. Χρειάζονται μόνο μερικές δοκιμές για να το συνηθίσεις. Λατρεύω το γεγονός ότι δεν χρειάζεται να ξοδεύω χρόνο για κοφτερά μαχαίρια. Δεν είμαι μόνο εγώ ενθουσιασμένος, και οι φίλοι μου το λατρεύουν. Και φυσικά η 8ετής εγγύηση δείχνει πόσο σίγουρη είναι η Tormek για το προϊόν της.
Μην φοβηθείτε να επενδύσετε σε αυτό το ακονιστήρι. Έχω ξοδέψει πολλά χρήματα στο παρελθόν σε διάφορα άλλα, αλλά κανένα δεν κράτησε. Αυτό είναι μακράν το καλύτερο ακονιστήρι που θα μπορούσε να έχει ένα εστιατόριο. Είναι πανεύκολο στη χρήση, πολύ γρήγορο, και προσέξτε γιατί κάνει τα μαχαίρια πολύ κοφτερά!
The Tormek T-4 Bushcraft allows you to sharpen a variety of outdoor knives, hunting knives, fishing knives and axes. This sharpening machine comes with Tormek’s SG-200 Original Grindstone, which provides a wide range of sharpening properties in a single grindstone. You can easily alternate between coarse sharpening at 220 grit and finer sharpening that gives a surface equivalent to 1000 grit. This allows you to restore very badly damaged tools and make them as good as new, but you can easily sharpen tools that are just blunted, too.
Finishing off your sharpening with the leather honing wheel polishes the bevel and removes the burr formed during sharpening. This gives your tool maximum sharpness and a polished edge that lasts.
The Tormek T-4 Bushcraft has a fully cast zinc upper body that integrates the vital parts of the machine such as the motor, main shaft, handle and the precision mounts for the universal support. The base of the housing is made of impact-resistant green ABS plastic. All in all, this gives you a sturdy machine that can withstand pressure and offers unbeatable precision. The robust handle means you can easily move the machine when needed.
Tormek offers a set of jigs for different tools that can be purchased separately and used on the same system, depending on your needs. Chisels, drill bits, scissors and woodturning tools are all examples of other tools you can sharpen with the Tormek T-4 Bushcraft.
The Tormek SG-200 Original Grindstone has been developed over the years to combine efficient sharpening and a fine surface finish with long life.
The LA-145 Leather Honing Wheel gently removes the burr formed during sharpening while also polishing the edge. The leather honing wheel is used together with Tormek’s PA-70 Honing Compound.
Tormek’s KJ-45 Centering Knife Jig fits most types of knives, such as hunting and fishing knives, household knives, chef’s knives and craft knives.
With the AX-40 Axe Jig, the axe is fixed in the jig and you can easily follow the shape of the edge, regardless of whether it’s straight or rounded, hollow, flat, or convex beveled.
Width: 325 mm (12¾”)
Depth: 235 mm (9¼”)
Height: 257 mm (10 1/8″)
Width: 240 mm (9 7/16″)
Depth: 205 mm (8 1/16″)
Height: 260 mm (10¼”)
Inc. packaging: 10,3 kg (22.6 lbs)
Machine only: 8 kg (17.6 lbs)
Green/grey
1.7 m (5′ 7″)
Precision-cast zinc top, powder-coated
Impact-resistant green ABS plastic
SG-200 Original Grindstone
Aluminum oxide
Ø 200 × 40 mm (7.87 × 1.57″)
LA-145 Leather Honing Wheel
Cowhide from Tärnsjö Garveri, ABS plastic.
Ø 145 × 26 mm (5.71 × 1.02″)
Unique drive system with RKX18 rubber
Self-adjusting for load
MSK-200 Stainless Steel Shaft with EzyLock
120 rpm
Torque 8.4 Nm
Industrial motor, single phase, AC
120 W (input), 100-115 V / 220-240 V, 50-60 Hz
Continuous operation
Maintenance-free
Quiet running, 54 dB
10 000 hours of operating time
8-year warranty*, 5 years + 3 years when you register at tormek.com
* The warranty for the Tormek T-4 Original is 2 years when used for commercial, industrial, or educational purposes
Parts breakdown T-4 EN pdf, 226.1 kB.
Material safety data sheet PA-70 EN pdf, 224.8 kB.
Material Safety Data Sheet – Oil for Honing Wheel EN pdf, 111.6 kB.
To see all patents, please visit tormek.com/patents
Taking your Tormek T-4 Bushcraft out for some countryside sharpening is pure meditation.
See how to get started with your new Tormek T-4 Bushcraft.
It’s great that Tormek sharpening classes are available on YouTube, so my hunting and kitchen knives are amazingly sharp now. My one regret is that I didn’t buy a Tormek a long time ago. Very pleased
Bengt, Örebro
An investment for life
Peter, Karlsborg
Μπορεί επίσης να σας ενδιαφέρει
Compact water-cooled sharpening system for all edge tools
The Tormek T-4 Original is a compact quality machine that’s perfect for home and hobby use, or professionals with limited space. Knives, scissors, lawnmower blades and chisels. Most edge tools you can think of can be made sharper than when they were new with Tormek’s comprehensive jig system. The universal support provides precise repeatability, and you achieve razor sharpness with the leather honing wheel.
Professional knife sharpening in no time
With more than 40 years of experience of professional sharpening for woodworkers and trades, Tormek developed a sharpening machine specifically designed for sharpening chef’s knives – on site in the restaurant kitchen. The Tormek T-2 Pro Kitchen Knife Sharpener meets the professional kitchen’s stringent demands for sharpness, simplicity, and speed. Your knives are sharp, just when you need them!
Tormek T-2 Pro Kitchen Knife Sharpener is a knife sharpening system adapted and certified for commercial use. For home use we offer the Tormek T-1 Kitchen Knife Sharpener.
Create your own water-cooled sharpening system
Customize your own water-cooled sharpening system with the Tormek T-8 Custom. This enables you to create your own Tormek sharpening system, with your favorite accessories. Just add a grinding wheel, honing wheel, the right jigs and your own creativity. The Tormek T-8 Custom is ideal if you either have specific grinding wheel and honing wheel needs. Or maybe you already have a number of accessories and want to add another machine to your collection?
Celebrating 50 Years of Sharpness
All good things must come to an end – including our limited edition anniversary machine, which is now sold out in most countries.
The Tormek T-8 Black is a limited-edition, 50-year anniversary machine with an intense, all-black visual appearance that gives an edge to any workshop for a long time to come. With its 50-year Tormek warranty, you can trust your machine to just keep running and running. This machine is kitted to get your tools extremely sharp with high efficiency and precision. And who knows, there might also be a little surprise or two for you in the box.
Sales start in April 2023. Availability varies between markets.
